I have installed rTorrent with ruTorrent webUI running on lighttpd. I am able to add torrents, view its progress, delete, add, etc... I am also able to change the theme using the "theme" plugin. The "chunks" plugin is also working fine. But I am having trouble with making the "edit" plugin work. 
When I try to edit a torrent, I get the following error:
Code:
XMLRPC error: Could not find info-hash. [gettrackers]and the torrent file gets deleted.
After a 12-hour marathon session of trying to fix it and missing going to work because of lack of sleep, I finally gave up and came to this forum for help.
I am running optware on TomatoUSB on a Asus RT-N16 router. I have got the following packages installed:
libtorrent 0.12.6-1
rtorrent 0.8.6-1
rutorrent 3.3, with all plugins of the 3.3 version.
lighttpd 1.4.29-1
php-fcgi 5.2.17-1
spawn-fcgi 1.6.3-1
xmlrpc-c 1.11.00-3
This is the rtorrent config file:
Code:
# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed. Remember to
# uncomment the options you wish to enable.
# Minumum amount of peers to connect per torrent, if available.
min_peers = 20
# Minumum amount of peers to connect per torrent.
max_peers = 40
# Same as above but for seeding completed torrents (-1 = same as downloading)
#min_peers_seed = 10
#max_peers_seed = 20
# Maximum number of simultanious uploads per torrent.
max_uploads = 5
# Global download rate in KiB. "0" for unlimited.
download_rate = 0
# Global upload rate in KiB. "0" for unlimited.
upload_rate = 20
# Default directory to save downloaded files. Note it doesn't support
# space yet.
directory = /mnt/Data/Downloads/
# Enable the default ratio group.
ratio.enable=
# Change the limits, the defaults should be sufficient.
ratio.min.set=100
ratio.max.set=300
ratio.upload.set=20M
# Changing the command triggered when the ratio is reached.
system.method.set = group.seeding.ratio.command, d.close=, d.erase=
# Watch a directory for new torrents, and stop those that have been deleted.
schedule = watch_directory,5,5,load_start=/mnt/Data/.rTorrent/torrents/*.torrent
schedule = untied_directory,5,5,stop_untied=
# Close torrents when diskspace is low.
#schedule = low_diskspace,5,60,close_low_diskspace=100M
# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = /mnt/Data/.rTorrent/Session
# The ip address reported to the tracker.
#ip = rakshasa
# The ip address the listening socket and outgoing connections is
# bound to.
#bind = rakshasa
# Port range to use for listening.
port_range = 35167-35167
# Start opening ports at a random position within the port range.
#port_random = no
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
#check_hash = no
# Set whetever the client should try to connect to UDP trackers.
#use_udp_trackers = yes
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
#
# Do not modify the following parameters unless you know what you're doing.
#
# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10
# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100
# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
# Max number of files to keep open simultaniously.
#max_open_files = 128
# Number of sockets to simultaneously keep open.
#max_open_sockets = <no default>
# Example of scheduling commands: Switch between two ip's every 5
# seconds.
#schedule = "ip_tick1,5,10,ip=torretta"
#schedule = "ip_tick2,10,10,ip=lampedusa"
# Remove a scheduled event.
#schedule_remove = "ip_tick1"
# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,"stop_on_ratio=200,200M,2000"
#schedule = ratio,30,60,stop_on_ratio=200
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
# encryption = allow_incoming,enable_retry,prefer_plaintext
# Enable DHT support for trackerless torrents or when all trackers are down.
# May be set to "disable" (completely disable DHT), "off" (do not start DHT),
# "auto" (start and stop DHT as needed), or "on" (start DHT immediately).
# The default is "off". For DHT to work, a session directory must be defined.
#
# dht = auto
# UDP port to use for DHT.
#
# dht_port = 6881
# Enable peer exchange (for torrents not marked private)
#
# peer_exchange = yes
#
# Do not modify the following parameters unless you know what you're doing.
#
scgi_port = 127.0.0.1:5050
execute = {sh,-c,/opt/bin/php /opt/share/www/lighttpd/rutorrent/phpinitplugins.php root &}
The ruTorrent config file:
Code:
<?php
// configuration parameters
// for snoopy client
@define('HTTP_USER_AGENT', 'Mozilla/5.0 (Windows; U; Windows NT 5.1; pl; rv:1.9) Gecko/2008052906 Firefox/3.0', true);
@define('HTTP_TIME_OUT', 30, true); // in seconds
@define('HTTP_USE_GZIP', true, true);
@define('RPC_TIME_OUT', 5, true); // in seconds
@define('LOG_RPC_CALLS', false, true);
@define('LOG_RPC_FAULTS', true, true);
// for php
@define('PHP_USE_GZIP', false, true);
@define('PHP_GZIP_LEVEL', 2, true);
$do_diagnostic = true;
$log_file = '/tmp/errors.log'; // path to log file (comment or make empty to disable logging)
$saveUploadedTorrents = true; // Save uploaded torrents into profile/torrents directory or not
$overwriteUploadedTorrents = false; // Overwrite existing uploaded torrents into profile/torrents directory or make unique name
$topDirectory = '/'; // Upper available directory. Absolute path with trail slash.
$forbidUserSettings = false;
$scgi_port = 5050;
$scgi_host = "127.0.0.1";
// For web->rtorrent link through unix domain socket
// (scgi_local in rtorrent conf file), change variables
// above to something like this:
//
// $scgi_port = 0;
// $scgi_host = "unix:///tmp/rpc.socket";
$XMLRPCMountPoint = "/RPC2"; // DO NOT DELETE THIS LINE!!! DO NOT COMMENT THIS LINE!!!
$pathToExternals = array(
"php" => '', // Something like /usr/bin/php. If empty, will be found in PATH.
"curl" => '', // Something like /usr/bin/curl. If empty, will be found in PATH.
"gzip" => '', // Something like /usr/bin/gzip. If empty, will be found in PATH.
"id" => '', // Something like /usr/bin/id. If empty, will be found in PATH.
"stat" => '', // Something like /usr/bin/stat. If empty, will be found in PATH.
);
$localhosts = array( // list of local interfaces
"127.0.0.1",
"localhost",
);
$profilePath = '/mnt/Data/.rTorrent'; // Path to users profiles
$profileMask = 0777; // Mask for files and directory creation in users profiles.
// Both web-server and rtorrent users must have read-write access to its.
// For example, if web-server and rtorrent users are in some group then value may be 0770
?>
When I try to edit a torrent, I get the following error:
Code:
XMLRPC error: Could not find info-hash. [gettrackers]and the torrent file gets deleted.
After a 12-hour marathon session of trying to fix it and missing going to work because of lack of sleep, I finally gave up and came to this forum for help.
I am running optware on TomatoUSB on a Asus RT-N16 router. I have got the following packages installed:
libtorrent 0.12.6-1
rtorrent 0.8.6-1
rutorrent 3.3, with all plugins of the 3.3 version.
lighttpd 1.4.29-1
php-fcgi 5.2.17-1
spawn-fcgi 1.6.3-1
xmlrpc-c 1.11.00-3
This is the rtorrent config file:
Code:
# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed. Remember to
# uncomment the options you wish to enable.
# Minumum amount of peers to connect per torrent, if available.
min_peers = 20
# Minumum amount of peers to connect per torrent.
max_peers = 40
# Same as above but for seeding completed torrents (-1 = same as downloading)
#min_peers_seed = 10
#max_peers_seed = 20
# Maximum number of simultanious uploads per torrent.
max_uploads = 5
# Global download rate in KiB. "0" for unlimited.
download_rate = 0
# Global upload rate in KiB. "0" for unlimited.
upload_rate = 20
# Default directory to save downloaded files. Note it doesn't support
# space yet.
directory = /mnt/Data/Downloads/
# Enable the default ratio group.
ratio.enable=
# Change the limits, the defaults should be sufficient.
ratio.min.set=100
ratio.max.set=300
ratio.upload.set=20M
# Changing the command triggered when the ratio is reached.
system.method.set = group.seeding.ratio.command, d.close=, d.erase=
# Watch a directory for new torrents, and stop those that have been deleted.
schedule = watch_directory,5,5,load_start=/mnt/Data/.rTorrent/torrents/*.torrent
schedule = untied_directory,5,5,stop_untied=
# Close torrents when diskspace is low.
#schedule = low_diskspace,5,60,close_low_diskspace=100M
# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = /mnt/Data/.rTorrent/Session
# The ip address reported to the tracker.
#ip = rakshasa
# The ip address the listening socket and outgoing connections is
# bound to.
#bind = rakshasa
# Port range to use for listening.
port_range = 35167-35167
# Start opening ports at a random position within the port range.
#port_random = no
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
#check_hash = no
# Set whetever the client should try to connect to UDP trackers.
#use_udp_trackers = yes
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
#
# Do not modify the following parameters unless you know what you're doing.
#
# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10
# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100
# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
# Max number of files to keep open simultaniously.
#max_open_files = 128
# Number of sockets to simultaneously keep open.
#max_open_sockets = <no default>
# Example of scheduling commands: Switch between two ip's every 5
# seconds.
#schedule = "ip_tick1,5,10,ip=torretta"
#schedule = "ip_tick2,10,10,ip=lampedusa"
# Remove a scheduled event.
#schedule_remove = "ip_tick1"
# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,"stop_on_ratio=200,200M,2000"
#schedule = ratio,30,60,stop_on_ratio=200
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
# encryption = allow_incoming,enable_retry,prefer_plaintext
# Enable DHT support for trackerless torrents or when all trackers are down.
# May be set to "disable" (completely disable DHT), "off" (do not start DHT),
# "auto" (start and stop DHT as needed), or "on" (start DHT immediately).
# The default is "off". For DHT to work, a session directory must be defined.
#
# dht = auto
# UDP port to use for DHT.
#
# dht_port = 6881
# Enable peer exchange (for torrents not marked private)
#
# peer_exchange = yes
#
# Do not modify the following parameters unless you know what you're doing.
#
scgi_port = 127.0.0.1:5050
execute = {sh,-c,/opt/bin/php /opt/share/www/lighttpd/rutorrent/phpinitplugins.php root &}
The ruTorrent config file:
Code:
<?php
// configuration parameters
// for snoopy client
@define('HTTP_USER_AGENT', 'Mozilla/5.0 (Windows; U; Windows NT 5.1; pl; rv:1.9) Gecko/2008052906 Firefox/3.0', true);
@define('HTTP_TIME_OUT', 30, true); // in seconds
@define('HTTP_USE_GZIP', true, true);
@define('RPC_TIME_OUT', 5, true); // in seconds
@define('LOG_RPC_CALLS', false, true);
@define('LOG_RPC_FAULTS', true, true);
// for php
@define('PHP_USE_GZIP', false, true);
@define('PHP_GZIP_LEVEL', 2, true);
$do_diagnostic = true;
$log_file = '/tmp/errors.log'; // path to log file (comment or make empty to disable logging)
$saveUploadedTorrents = true; // Save uploaded torrents into profile/torrents directory or not
$overwriteUploadedTorrents = false; // Overwrite existing uploaded torrents into profile/torrents directory or make unique name
$topDirectory = '/'; // Upper available directory. Absolute path with trail slash.
$forbidUserSettings = false;
$scgi_port = 5050;
$scgi_host = "127.0.0.1";
// For web->rtorrent link through unix domain socket
// (scgi_local in rtorrent conf file), change variables
// above to something like this:
//
// $scgi_port = 0;
// $scgi_host = "unix:///tmp/rpc.socket";
$XMLRPCMountPoint = "/RPC2"; // DO NOT DELETE THIS LINE!!! DO NOT COMMENT THIS LINE!!!
$pathToExternals = array(
"php" => '', // Something like /usr/bin/php. If empty, will be found in PATH.
"curl" => '', // Something like /usr/bin/curl. If empty, will be found in PATH.
"gzip" => '', // Something like /usr/bin/gzip. If empty, will be found in PATH.
"id" => '', // Something like /usr/bin/id. If empty, will be found in PATH.
"stat" => '', // Something like /usr/bin/stat. If empty, will be found in PATH.
);
$localhosts = array( // list of local interfaces
"127.0.0.1",
"localhost",
);
$profilePath = '/mnt/Data/.rTorrent'; // Path to users profiles
$profileMask = 0777; // Mask for files and directory creation in users profiles.
// Both web-server and rtorrent users must have read-write access to its.
// For example, if web-server and rtorrent users are in some group then value may be 0770
?>