Hi Guys,
Need some help from the experts! I am trying to setup rtorrent+rutorrent on my netbook running Fedora 14.
I am getting the error message from rutorrent, "Bad link to rtorrent. Check if it is really running. Check $scgi_port and $scgi_port host settings in config.php and scgi_port in rTorrent configuration file"
I have included a screenshot of the error.
Here is my rtorrent config file:
# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed. Remember to
# uncomment the options you wish to enable.
# Maximum and minimum number of peers to connect to per torrent.
#min_peers = 40
#max_peers = 100
# Same as above but for seeding completed torrents (-1 = same as downloading)
#min_peers_seed = 10
#max_peers_seed = 50
# Maximum number of simultanious uploads per torrent.
#max_uploads = 15
# Global upload and download rate in KiB. "0" for unlimited.
#download_rate = 0
#upload_rate = 0
# Default directory to save the downloaded torrents.
#directory = ./
# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
#session = ./session
# Watch a directory for new torrents, and stop those that have been
# deleted.
#schedule = watch_directory,5,5,load_start=./watch/*.torrent
#schedule = untied_directory,5,5,stop_untied=
# Close torrents when diskspace is low.
#schedule = low_diskspace,5,60,close_low_diskspace=100M
# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,"stop_on_ratio=200,200M,2000"
# The ip address reported to the tracker.
#ip = 127.0.0.1
#ip = rakshasa.no
# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no
# Port range to use for listening.
#port_range = 6890-6999
# Start opening ports at a random position within the port range.
#port_random = no
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
#check_hash = no
# Set whetever the client should try to connect to UDP trackers.
#use_udp_trackers = yes
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
# encryption = allow_incoming,enable_retry,prefer_plaintext
# Enable DHT support for trackerless torrents or when all trackers are down.
# May be set to "disable" (completely disable DHT), "off" (do not start DHT),
# "auto" (start and stop DHT as needed), or "on" (start DHT immediately).
# The default is "off". For DHT to work, a session directory must be defined.
#
# dht = auto
# UDP port to use for DHT.
#
# dht_port = 6881
# Enable peer exchange (for torrents not marked private)
#
# peer_exchange = yes
#
# Do not modify the following parameters unless you know what you're doing.
#
# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10
# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100
# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
scgi_port = localhost:5000
and my config.php:
<?php
// configuration parameters
// for snoopy client
@define('HTTP_USER_AGENT', 'Mozilla/5.0 (Windows; U; Windows NT 5.1; pl; rv:1.9) Gecko/2008052906 Firefox/3.0', true);
@define('HTTP_TIME_OUT', 30, true); // in seconds
@define('HTTP_USE_GZIP', true, true);
@define('RPC_TIME_OUT', 5, true); // in seconds
@define('LOG_RPC_CALLS', false, true);
@define('LOG_RPC_FAULTS', true, true);
// for php
@define('PHP_USE_GZIP', false, true);
@define('PHP_GZIP_LEVEL', 2, true);
$do_diagnostic = true;
$log_file = '/tmp/errors.log'; // path to log file (comment or make empty to disable logging)
$saveUploadedTorrents = true;
$topDirectory = '/'; // Upper available directory. Absolute path with trail slash.
$forbidUserSettings = false;
$scgi_port = 5000;
$scgi_host = "unix:///tmp/rpc.socket";
$XMLRPCMountPoint = "/var/www/lighttpd/rutorrent/RPC2"; // DO NOT DELETE THIS LINE!!! DO NOT COMMENT THIS LINE!!!
$pathToExternals = array(
"php" => '', // Something like /usr/bin/php. If empty, will be founded in PATH.
"curl" => '', // Something like /usr/bin/curl. If empty, will be founded in PATH.
"gzip" => '', // Something like /usr/bin/gzip. If empty, will be founded in PATH.
"id" => '', // Something like /usr/bin/id. If empty, will be founded in PATH.
"stat" => '', // Something like /usr/bin/stat. If empty, will be founded in PATH.
);
// For web->rtorrent link through unix domain socket
// (scgi_local in rtorrent conf file), change variables
// above to something like this:
//
// $scgi_port = 5000;
// $scgi_host = "unix:///tmp/rpc.socket";
?>
anyideas???
Thanks!
Need some help from the experts! I am trying to setup rtorrent+rutorrent on my netbook running Fedora 14.
I am getting the error message from rutorrent, "Bad link to rtorrent. Check if it is really running. Check $scgi_port and $scgi_port host settings in config.php and scgi_port in rTorrent configuration file"
I have included a screenshot of the error.
Here is my rtorrent config file:
# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed. Remember to
# uncomment the options you wish to enable.
# Maximum and minimum number of peers to connect to per torrent.
#min_peers = 40
#max_peers = 100
# Same as above but for seeding completed torrents (-1 = same as downloading)
#min_peers_seed = 10
#max_peers_seed = 50
# Maximum number of simultanious uploads per torrent.
#max_uploads = 15
# Global upload and download rate in KiB. "0" for unlimited.
#download_rate = 0
#upload_rate = 0
# Default directory to save the downloaded torrents.
#directory = ./
# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
#session = ./session
# Watch a directory for new torrents, and stop those that have been
# deleted.
#schedule = watch_directory,5,5,load_start=./watch/*.torrent
#schedule = untied_directory,5,5,stop_untied=
# Close torrents when diskspace is low.
#schedule = low_diskspace,5,60,close_low_diskspace=100M
# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,"stop_on_ratio=200,200M,2000"
# The ip address reported to the tracker.
#ip = 127.0.0.1
#ip = rakshasa.no
# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no
# Port range to use for listening.
#port_range = 6890-6999
# Start opening ports at a random position within the port range.
#port_random = no
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
#check_hash = no
# Set whetever the client should try to connect to UDP trackers.
#use_udp_trackers = yes
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
# encryption = allow_incoming,enable_retry,prefer_plaintext
# Enable DHT support for trackerless torrents or when all trackers are down.
# May be set to "disable" (completely disable DHT), "off" (do not start DHT),
# "auto" (start and stop DHT as needed), or "on" (start DHT immediately).
# The default is "off". For DHT to work, a session directory must be defined.
#
# dht = auto
# UDP port to use for DHT.
#
# dht_port = 6881
# Enable peer exchange (for torrents not marked private)
#
# peer_exchange = yes
#
# Do not modify the following parameters unless you know what you're doing.
#
# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10
# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100
# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
scgi_port = localhost:5000
and my config.php:
<?php
// configuration parameters
// for snoopy client
@define('HTTP_USER_AGENT', 'Mozilla/5.0 (Windows; U; Windows NT 5.1; pl; rv:1.9) Gecko/2008052906 Firefox/3.0', true);
@define('HTTP_TIME_OUT', 30, true); // in seconds
@define('HTTP_USE_GZIP', true, true);
@define('RPC_TIME_OUT', 5, true); // in seconds
@define('LOG_RPC_CALLS', false, true);
@define('LOG_RPC_FAULTS', true, true);
// for php
@define('PHP_USE_GZIP', false, true);
@define('PHP_GZIP_LEVEL', 2, true);
$do_diagnostic = true;
$log_file = '/tmp/errors.log'; // path to log file (comment or make empty to disable logging)
$saveUploadedTorrents = true;
$topDirectory = '/'; // Upper available directory. Absolute path with trail slash.
$forbidUserSettings = false;
$scgi_port = 5000;
$scgi_host = "unix:///tmp/rpc.socket";
$XMLRPCMountPoint = "/var/www/lighttpd/rutorrent/RPC2"; // DO NOT DELETE THIS LINE!!! DO NOT COMMENT THIS LINE!!!
$pathToExternals = array(
"php" => '', // Something like /usr/bin/php. If empty, will be founded in PATH.
"curl" => '', // Something like /usr/bin/curl. If empty, will be founded in PATH.
"gzip" => '', // Something like /usr/bin/gzip. If empty, will be founded in PATH.
"id" => '', // Something like /usr/bin/id. If empty, will be founded in PATH.
"stat" => '', // Something like /usr/bin/stat. If empty, will be founded in PATH.
);
// For web->rtorrent link through unix domain socket
// (scgi_local in rtorrent conf file), change variables
// above to something like this:
//
// $scgi_port = 5000;
// $scgi_host = "unix:///tmp/rpc.socket";
?>
anyideas???
Thanks!
Click for large view