Hello,
I get the following errors when I try to start rutorrent.
Code:
[17.08.2010 11:00:50] WebUI started.
[17.08.2010 11:00:50] Bad response from server: (403 [error,getplugins]) <?xml version="1.0" encoding="iso-8859-1"?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> <head> <title>403 - Forbidden</title> </head> <body> <h1>403 - Forbidden</h1> </body> </html>
[17.08.2010 11:00:50] Bad response from server: (403 [error,getuisettings]) <?xml version="1.0" encoding="iso-8859-1"?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> <head> <title>403 - Forbidden</title> </head> <body> <h1>403 - Forbidden</h1> </body> </html>
Here are my rtorrent, lighttpd, and rutorrent config files:
Code:
# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed. Remember to
# uncomment the options you wish to enable.
# Maximum and minimum number of peers to connect to per torrent.
#min_peers = 40
#max_peers = 100
# Same as above but for seeding completed torrents (-1 = same as downloading)
#min_peers_seed = 10
#max_peers_seed = 50
# Maximum number of simultanious uploads per torrent.
#max_uploads = 15
# Global upload and download rate in KiB. "0" for unlimited.
download_rate = 1600
upload_rate = 250
# Default directory to save the downloaded torrents.
#directory = ./
# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = /home/reid/.session
# Watch a directory for new torrents, and stop those that have been
# deleted.
#schedule = watch_directory,5,5,load_start=./watch/*.torrent
#schedule = untied_directory,5,5,stop_untied=
# Close torrents when diskspace is low.
#schedule = low_diskspace,5,60,close_low_diskspace=100M
# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,"stop_on_ratio=200,200M,2000"
# The ip address reported to the tracker.
#ip = 127.0.0.1
#ip = rakshasa.no
# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no
# Port range to use for listening.
port_range = 38947-39047
# Start opening ports at a random position within the port range.
#port_random = no
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
#check_hash = no
# Set whetever the client should try to connect to UDP trackers.
#use_udp_trackers = yes
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
# encryption = allow_incoming,enable_retry,prefer_plaintext
# Enable DHT support for trackerless torrents or when all trackers are down.
# May be set to "disable" (completely disable DHT), "off" (do not start DHT),
# "auto" (start and stop DHT as needed), or "on" (start DHT immediately).
# The default is "off". For DHT to work, a session directory must be defined.
#
# dht = auto
# UDP port to use for DHT.
#
# dht_port = 6881
# Enable peer exchange (for torrents not marked private)
#
# peer_exchange = yes
#
# Do not modify the following parameters unless you know what you're doing.
#
# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10
# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100
# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
schedule = watch_directory1,10,10,"load_start=/home/reid/.watch/watchmusic/*.torrent,d.set_directory=/home/reid/music/"
schedule = watch_directory2,10,10,"load_start=/home/reid/.watch/watchmov/*.torrent,d.set_directory=/home/reid/movies/"
schedule = watch_directory3,10,10,"load_start=/home/reid/.watch/watchcheg/*.torrent,d.set_directory=/home/reid/cheg/"
schedule = watch_directory4,10,10,"load_start=/home/reid/.watch/watchmisc/*.torrent,d.set_directory=/home/reid/misc/"
schedule = filter_active,10,10,"view_filter = active,\"or={d.get_up_rate=,d.get_down_rate=}\""
scgi_port = localhost:5000
lighttpd
Code:
# lighttpd configuration file
#
# use it as a base for lighttpd 1.0.0 and above
#
# $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $
############ Options you really have to take care of ####################
## modules to load
# at least mod_access and mod_accesslog should be loaded
# all other module should only be loaded if really neccesary
# - saves some time
# - saves memory
server.modules = (
# "mod_rewrite",
# "mod_redirect",
# "mod_alias",
"mod_access",
# "mod_trigger_b4_dl",
# "mod_auth",
# "mod_status",
# "mod_setenv",
"mod_fastcgi",
# "mod_proxy",
# "mod_simple_vhost",
# "mod_evhost",
# "mod_userdir",
"mod_scgi",
"mod_compress",
# "mod_ssi",
# "mod_usertrack",
# "mod_expire",
# "mod_secdownload",
# "mod_rrdtool",
"mod_accesslog" )
server.modules += ( "mod_scgi" )
scgi.server = (
"/RPC2" => # RT_DIR
( "127.0.0.1" =>
(
"host" => "127.0.0.1", # Ip where rtorrent is listening
"port" => 5000, # Port specified in .rtorrent.rc
"check-local" => "disable"
)
)
)
## A static document-root. For virtual hosting take a look at the
## mod_simple_vhost module.
server.document-root = "/var/www/"
## where to send error-messages to
server.errorlog = "/var/log/lighttpd/error.log"
# files to check for if .../ is requested
index-file.names = ( "index.php", "index.html",
"index.htm", "default.htm" )
## set the event-handler (read the performance section in the manual)
# server.event-handler = "freebsd-kqueue" # needed on OS X
# mimetype mapping
mimetype.assign = (
".pdf" => "application/pdf",
".sig" => "application/pgp-signature",
".spl" => "application/futuresplash",
".class" => "application/octet-stream",
".ps" => "application/postscript",
".torrent" => "application/x-bittorrent",
".dvi" => "application/x-dvi",
".gz" => "application/x-gzip",
".pac" => "application/x-ns-proxy-autoconfig",
".swf" => "application/x-shockwave-flash",
".tar.gz" => "application/x-tgz",
".tgz" => "application/x-tgz",
".tar" => "application/x-tar",
".zip" => "application/zip",
".mp3" => "audio/mpeg",
".m3u" => "audio/x-mpegurl",
".wma" => "audio/x-ms-wma",
".wax" => "audio/x-ms-wax",
".ogg" => "application/ogg",
".wav" => "audio/x-wav",
".gif" => "image/gif",
".jar" => "application/x-java-archive",
".jpg" => "image/jpeg",
".jpeg" => "image/jpeg",
".png" => "image/png",
".xbm" => "image/x-xbitmap",
".xpm" => "image/x-xpixmap",
".xwd" => "image/x-xwindowdump",
".css" => "text/css",
".html" => "text/html",
".htm" => "text/html",
".js" => "text/javascript",
".asc" => "text/plain",
".c" => "text/plain",
".cpp" => "text/plain",
".log" => "text/plain",
".conf" => "text/plain",
".text" => "text/plain",
".txt" => "text/plain",
".dtd" => "text/xml",
".xml" => "text/xml",
".mpeg" => "video/mpeg",
".mpg" => "video/mpeg",
".mov" => "video/quicktime",
".qt" => "video/quicktime",
".avi" => "video/x-msvideo",
".asf" => "video/x-ms-asf",
".asx" => "video/x-ms-asf",
".wmv" => "video/x-ms-wmv",
".bz2" => "application/x-bzip",
".tbz" => "application/x-bzip-compressed-tar",
".tar.bz2" => "application/x-bzip-compressed-tar",
# default mime type
"" => "application/octet-stream",
)
# Use the "Content-Type" extended attribute to obtain mime type if possible
#mimetype.use-xattr = "enable"
## send a different Server: header
## be nice and keep it at lighttpd
# server.tag = "lighttpd"
#### accesslog module
accesslog.filename = "/var/log/lighttpd/access.log"
## deny access the file-extensions
#
# ~ is for backupfiles from vi, emacs, joe, ...
# .inc is often used for code includes which should in general not be part
# of the document-root
url.access-deny = ( "~", ".inc" )
$HTTP["url"] =~ "\.pdf$" {
server.range-requests = "disable"
}
##
# which extensions should not be handle via static-file transfer
#
# .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi
static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" )
######### Options that are good to be but not neccesary to be changed #######
## bind to port (default: 80)
#server.port = 81
## bind to localhost (default: all interfaces)
#server.bind = "127.0.0.1"
## error-handler for status 404
#server.error-handler-404 = "/error-handler.html"
#server.error-handler-404 = "/error-handler.php"
## to help the rc.scripts
server.pid-file = "/var/run/lighttpd/lighttpd.pid"
###### virtual hosts
##
## If you want name-based virtual hosting add the next three settings and load
## mod_simple_vhost
##
## document-root =
## virtual-server-root + virtual-server-default-host + virtual-server-docroot
## or
## virtual-server-root + http-host + virtual-server-docroot
##
#simple-vhost.server-root = "/srv/http/vhosts/"
#simple-vhost.default-host = "www.example.org"
#simple-vhost.document-root = "/htdocs/"
##
## Format: <errorfile-prefix><status-code>.html
## -> ..../status-404.html for 'File not found'
#server.errorfile-prefix = "/usr/share/lighttpd/errors/status-"
#server.errorfile-prefix = "/srv/http/errors/status-"
## virtual directory listings
#dir-listing.activate = "enable"
## select encoding for directory listings
#dir-listing.encoding = "utf-8"
## enable debugging
#debug.log-request-header = "enable"
#debug.log-response-header = "enable"
#debug.log-request-handling = "enable"
#debug.log-file-not-found = "enable"
### only root can use these options
#
# chroot() to directory (default: no chroot() )
#server.chroot = "/"
## change uid to <uid> (default: don't care)
server.username = "http"
## change uid to <uid> (default: don't care)
server.groupname = "http"
#### compress module
#compress.cache-dir = "/var/cache/lighttpd/compress/"
#compress.filetype = ("text/plain", "text/html")
#### proxy module
## read proxy.txt for more info
#proxy.server = ( ".php" =>
# ( "localhost" =>
# (
# "host" => "192.168.0.101",
# "port" => 80
# )
# )
# )
#### fastcgi module
## read fastcgi.txt for more info
## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini
#fastcgi.server = ( ".php" =>
# ( "localhost" =>
# (
# "socket" => "/var/run/lighttpd/php-fastcgi.socket",
# "bin-path" => "/usr/bin/php-cgi"
# )
# )
# )
#### CGI module
#cgi.assign = ( ".pl" => "/usr/bin/perl",
# ".cgi" => "/usr/bin/perl" )
#
#### SSL engine
#ssl.engine = "enable"
#ssl.pemfile = "/etc/ssl/private/lighttpd.pem"
#### status module
#status.status-url = "/server-status"
#status.config-url = "/server-config"
#### auth module
## read authentication.txt for more info
#auth.backend = "plain"
#auth.backend.plain.userfile = "lighttpd.user"
#auth.backend.plain.groupfile = "lighttpd.group"
#auth.backend.ldap.hostname = "localhost"
#auth.backend.ldap.base-dn = "dc=my-domain,dc=com"
#auth.backend.ldap.filter = "(uid=$)"
#auth.require = ( "/server-status" =>
# (
# "method" => "digest",
# "realm" => "download archiv",
# "require" => "user=jan"
# ),
# "/server-config" =>
# (
# "method" => "digest",
# "realm" => "download archiv",
# "require" => "valid-user"
# )
# )
#### url handling modules (rewrite, redirect, access)
#url.rewrite = ( "^/$" => "/server-status" )
#url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" )
#### both rewrite/redirect support back reference to regex conditional using %n
#$HTTP["host"] =~ "^www\.(.*)" {
# url.redirect = ( "^/(.*)" => "http://%1/$1" )
#}
#
# define a pattern for the host url finding
# %% => % sign
# %0 => domain name + tld
# %1 => tld
# %2 => domain name without tld
# %3 => subdomain 1 name
# %4 => subdomain 2 name
#
#evhost.path-pattern = "/srv/http/vhosts/%3/htdocs/"
#### expire module
#expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "access plus 1 seconds 2 minutes")
#### ssi
#ssi.extension = ( ".shtml" )
#### rrdtool
#rrdtool.binary = "/usr/bin/rrdtool"
#rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd"
#### setenv
#setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" )
#setenv.add-response-header = ( "X-Secret-Message" => "42" )
## for mod_trigger_b4_dl
# trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db"
# trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" )
# trigger-before-download.trigger-url = "^/trigger/"
# trigger-before-download.download-url = "^/download/"
# trigger-before-download.deny-url = "http://127.0.0.1/index.html"
# trigger-before-download.trigger-timeout = 10
#### variable usage:
## variable name without "." is auto prefixed by "var." and becomes "var.bar"
#bar = 1
#var.mystring = "foo"
## integer add
#bar += 1
## string concat, with integer cast as string, result: "www.foo1.com"
#server.name = "www." + mystring + var.bar + ".com"
## array merge
#index-file.names = (foo + ".php") + index-file.names
#index-file.names += (foo + ".php")
#### include
#include /etc/lighttpd/lighttpd-inc.conf
## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf"
#include "lighttpd-inc.conf"
#### include_shell
#include_shell "echo var.a=1"
## the above is same as:
#var.a=1
rutorrent
Code:
<?php
// configuration parameters
// for snoopy client
@define('HTTP_USER_AGENT', 'Mozilla/5.0 (Windows; U; Windows NT 5.1; pl; rv:1.9) Gecko/2008052906 Firefox/3.0', true);
@define('HTTP_TIME_OUT', 30, true); // in seconds
@define('HTTP_USE_GZIP', true, true);
@define('RPC_TIME_OUT', 5, true); // in seconds
@define('LOG_RPC_CALLS', false, true);
@define('LOG_RPC_FAULTS', true, true);
// for php
@define('PHP_USE_GZIP', false, true);
@define('PHP_GZIP_LEVEL', 2, true);
$do_diagnostic = true;
$log_file = '/tmp/errors.log'; // path to log file (comment or make empty to disable logging)
$saveUploadedTorrents = true;
$topDirectory = '/'; // Upper available directory. Absolute path with trail slash.
$forbidUserSettings = false;
$scgi_port = 5000;
$scgi_host = "127.0.0.1";
$XMLRPCMountPoint = "/RPC2"; // DO NOT DELETE THIS LINE!!! DO NOT COMMENT THIS LINE!!!
$pathToExternals = array(
"php" => '', // Something like /usr/bin/php. If empty, will be founded in PATH.
"curl" => '', // Something like /usr/bin/curl. If empty, will be founded in PATH.
"gzip" => '', // Something like /usr/bin/gzip. If empty, will be founded in PATH.
"id" => '', // Something like /usr/bin/id. If empty, will be founded in PATH.
);
// For web->rtorrent link through unix domain socket
// (scgi_local in rtorrent conf file), change variables
// above to something like this:
//
// $scgi_port = 0;
// $scgi_host = "unix:///tmp/rpc.socket";
?>
thanks for any help you can offer.
I get the following errors when I try to start rutorrent.
Code:
[17.08.2010 11:00:50] WebUI started.
[17.08.2010 11:00:50] Bad response from server: (403 [error,getplugins]) <?xml version="1.0" encoding="iso-8859-1"?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> <head> <title>403 - Forbidden</title> </head> <body> <h1>403 - Forbidden</h1> </body> </html>
[17.08.2010 11:00:50] Bad response from server: (403 [error,getuisettings]) <?xml version="1.0" encoding="iso-8859-1"?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> <head> <title>403 - Forbidden</title> </head> <body> <h1>403 - Forbidden</h1> </body> </html>
Here are my rtorrent, lighttpd, and rutorrent config files:
Code:
# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed. Remember to
# uncomment the options you wish to enable.
# Maximum and minimum number of peers to connect to per torrent.
#min_peers = 40
#max_peers = 100
# Same as above but for seeding completed torrents (-1 = same as downloading)
#min_peers_seed = 10
#max_peers_seed = 50
# Maximum number of simultanious uploads per torrent.
#max_uploads = 15
# Global upload and download rate in KiB. "0" for unlimited.
download_rate = 1600
upload_rate = 250
# Default directory to save the downloaded torrents.
#directory = ./
# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = /home/reid/.session
# Watch a directory for new torrents, and stop those that have been
# deleted.
#schedule = watch_directory,5,5,load_start=./watch/*.torrent
#schedule = untied_directory,5,5,stop_untied=
# Close torrents when diskspace is low.
#schedule = low_diskspace,5,60,close_low_diskspace=100M
# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,"stop_on_ratio=200,200M,2000"
# The ip address reported to the tracker.
#ip = 127.0.0.1
#ip = rakshasa.no
# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no
# Port range to use for listening.
port_range = 38947-39047
# Start opening ports at a random position within the port range.
#port_random = no
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
#check_hash = no
# Set whetever the client should try to connect to UDP trackers.
#use_udp_trackers = yes
# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa
# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
# encryption = allow_incoming,enable_retry,prefer_plaintext
# Enable DHT support for trackerless torrents or when all trackers are down.
# May be set to "disable" (completely disable DHT), "off" (do not start DHT),
# "auto" (start and stop DHT as needed), or "on" (start DHT immediately).
# The default is "off". For DHT to work, a session directory must be defined.
#
# dht = auto
# UDP port to use for DHT.
#
# dht_port = 6881
# Enable peer exchange (for torrents not marked private)
#
# peer_exchange = yes
#
# Do not modify the following parameters unless you know what you're doing.
#
# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10
# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100
# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
schedule = watch_directory1,10,10,"load_start=/home/reid/.watch/watchmusic/*.torrent,d.set_directory=/home/reid/music/"
schedule = watch_directory2,10,10,"load_start=/home/reid/.watch/watchmov/*.torrent,d.set_directory=/home/reid/movies/"
schedule = watch_directory3,10,10,"load_start=/home/reid/.watch/watchcheg/*.torrent,d.set_directory=/home/reid/cheg/"
schedule = watch_directory4,10,10,"load_start=/home/reid/.watch/watchmisc/*.torrent,d.set_directory=/home/reid/misc/"
schedule = filter_active,10,10,"view_filter = active,\"or={d.get_up_rate=,d.get_down_rate=}\""
scgi_port = localhost:5000
lighttpd
Code:
# lighttpd configuration file
#
# use it as a base for lighttpd 1.0.0 and above
#
# $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $
############ Options you really have to take care of ####################
## modules to load
# at least mod_access and mod_accesslog should be loaded
# all other module should only be loaded if really neccesary
# - saves some time
# - saves memory
server.modules = (
# "mod_rewrite",
# "mod_redirect",
# "mod_alias",
"mod_access",
# "mod_trigger_b4_dl",
# "mod_auth",
# "mod_status",
# "mod_setenv",
"mod_fastcgi",
# "mod_proxy",
# "mod_simple_vhost",
# "mod_evhost",
# "mod_userdir",
"mod_scgi",
"mod_compress",
# "mod_ssi",
# "mod_usertrack",
# "mod_expire",
# "mod_secdownload",
# "mod_rrdtool",
"mod_accesslog" )
server.modules += ( "mod_scgi" )
scgi.server = (
"/RPC2" => # RT_DIR
( "127.0.0.1" =>
(
"host" => "127.0.0.1", # Ip where rtorrent is listening
"port" => 5000, # Port specified in .rtorrent.rc
"check-local" => "disable"
)
)
)
## A static document-root. For virtual hosting take a look at the
## mod_simple_vhost module.
server.document-root = "/var/www/"
## where to send error-messages to
server.errorlog = "/var/log/lighttpd/error.log"
# files to check for if .../ is requested
index-file.names = ( "index.php", "index.html",
"index.htm", "default.htm" )
## set the event-handler (read the performance section in the manual)
# server.event-handler = "freebsd-kqueue" # needed on OS X
# mimetype mapping
mimetype.assign = (
".pdf" => "application/pdf",
".sig" => "application/pgp-signature",
".spl" => "application/futuresplash",
".class" => "application/octet-stream",
".ps" => "application/postscript",
".torrent" => "application/x-bittorrent",
".dvi" => "application/x-dvi",
".gz" => "application/x-gzip",
".pac" => "application/x-ns-proxy-autoconfig",
".swf" => "application/x-shockwave-flash",
".tar.gz" => "application/x-tgz",
".tgz" => "application/x-tgz",
".tar" => "application/x-tar",
".zip" => "application/zip",
".mp3" => "audio/mpeg",
".m3u" => "audio/x-mpegurl",
".wma" => "audio/x-ms-wma",
".wax" => "audio/x-ms-wax",
".ogg" => "application/ogg",
".wav" => "audio/x-wav",
".gif" => "image/gif",
".jar" => "application/x-java-archive",
".jpg" => "image/jpeg",
".jpeg" => "image/jpeg",
".png" => "image/png",
".xbm" => "image/x-xbitmap",
".xpm" => "image/x-xpixmap",
".xwd" => "image/x-xwindowdump",
".css" => "text/css",
".html" => "text/html",
".htm" => "text/html",
".js" => "text/javascript",
".asc" => "text/plain",
".c" => "text/plain",
".cpp" => "text/plain",
".log" => "text/plain",
".conf" => "text/plain",
".text" => "text/plain",
".txt" => "text/plain",
".dtd" => "text/xml",
".xml" => "text/xml",
".mpeg" => "video/mpeg",
".mpg" => "video/mpeg",
".mov" => "video/quicktime",
".qt" => "video/quicktime",
".avi" => "video/x-msvideo",
".asf" => "video/x-ms-asf",
".asx" => "video/x-ms-asf",
".wmv" => "video/x-ms-wmv",
".bz2" => "application/x-bzip",
".tbz" => "application/x-bzip-compressed-tar",
".tar.bz2" => "application/x-bzip-compressed-tar",
# default mime type
"" => "application/octet-stream",
)
# Use the "Content-Type" extended attribute to obtain mime type if possible
#mimetype.use-xattr = "enable"
## send a different Server: header
## be nice and keep it at lighttpd
# server.tag = "lighttpd"
#### accesslog module
accesslog.filename = "/var/log/lighttpd/access.log"
## deny access the file-extensions
#
# ~ is for backupfiles from vi, emacs, joe, ...
# .inc is often used for code includes which should in general not be part
# of the document-root
url.access-deny = ( "~", ".inc" )
$HTTP["url"] =~ "\.pdf$" {
server.range-requests = "disable"
}
##
# which extensions should not be handle via static-file transfer
#
# .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi
static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" )
######### Options that are good to be but not neccesary to be changed #######
## bind to port (default: 80)
#server.port = 81
## bind to localhost (default: all interfaces)
#server.bind = "127.0.0.1"
## error-handler for status 404
#server.error-handler-404 = "/error-handler.html"
#server.error-handler-404 = "/error-handler.php"
## to help the rc.scripts
server.pid-file = "/var/run/lighttpd/lighttpd.pid"
###### virtual hosts
##
## If you want name-based virtual hosting add the next three settings and load
## mod_simple_vhost
##
## document-root =
## virtual-server-root + virtual-server-default-host + virtual-server-docroot
## or
## virtual-server-root + http-host + virtual-server-docroot
##
#simple-vhost.server-root = "/srv/http/vhosts/"
#simple-vhost.default-host = "www.example.org"
#simple-vhost.document-root = "/htdocs/"
##
## Format: <errorfile-prefix><status-code>.html
## -> ..../status-404.html for 'File not found'
#server.errorfile-prefix = "/usr/share/lighttpd/errors/status-"
#server.errorfile-prefix = "/srv/http/errors/status-"
## virtual directory listings
#dir-listing.activate = "enable"
## select encoding for directory listings
#dir-listing.encoding = "utf-8"
## enable debugging
#debug.log-request-header = "enable"
#debug.log-response-header = "enable"
#debug.log-request-handling = "enable"
#debug.log-file-not-found = "enable"
### only root can use these options
#
# chroot() to directory (default: no chroot() )
#server.chroot = "/"
## change uid to <uid> (default: don't care)
server.username = "http"
## change uid to <uid> (default: don't care)
server.groupname = "http"
#### compress module
#compress.cache-dir = "/var/cache/lighttpd/compress/"
#compress.filetype = ("text/plain", "text/html")
#### proxy module
## read proxy.txt for more info
#proxy.server = ( ".php" =>
# ( "localhost" =>
# (
# "host" => "192.168.0.101",
# "port" => 80
# )
# )
# )
#### fastcgi module
## read fastcgi.txt for more info
## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini
#fastcgi.server = ( ".php" =>
# ( "localhost" =>
# (
# "socket" => "/var/run/lighttpd/php-fastcgi.socket",
# "bin-path" => "/usr/bin/php-cgi"
# )
# )
# )
#### CGI module
#cgi.assign = ( ".pl" => "/usr/bin/perl",
# ".cgi" => "/usr/bin/perl" )
#
#### SSL engine
#ssl.engine = "enable"
#ssl.pemfile = "/etc/ssl/private/lighttpd.pem"
#### status module
#status.status-url = "/server-status"
#status.config-url = "/server-config"
#### auth module
## read authentication.txt for more info
#auth.backend = "plain"
#auth.backend.plain.userfile = "lighttpd.user"
#auth.backend.plain.groupfile = "lighttpd.group"
#auth.backend.ldap.hostname = "localhost"
#auth.backend.ldap.base-dn = "dc=my-domain,dc=com"
#auth.backend.ldap.filter = "(uid=$)"
#auth.require = ( "/server-status" =>
# (
# "method" => "digest",
# "realm" => "download archiv",
# "require" => "user=jan"
# ),
# "/server-config" =>
# (
# "method" => "digest",
# "realm" => "download archiv",
# "require" => "valid-user"
# )
# )
#### url handling modules (rewrite, redirect, access)
#url.rewrite = ( "^/$" => "/server-status" )
#url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" )
#### both rewrite/redirect support back reference to regex conditional using %n
#$HTTP["host"] =~ "^www\.(.*)" {
# url.redirect = ( "^/(.*)" => "http://%1/$1" )
#}
#
# define a pattern for the host url finding
# %% => % sign
# %0 => domain name + tld
# %1 => tld
# %2 => domain name without tld
# %3 => subdomain 1 name
# %4 => subdomain 2 name
#
#evhost.path-pattern = "/srv/http/vhosts/%3/htdocs/"
#### expire module
#expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "access plus 1 seconds 2 minutes")
#### ssi
#ssi.extension = ( ".shtml" )
#### rrdtool
#rrdtool.binary = "/usr/bin/rrdtool"
#rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd"
#### setenv
#setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" )
#setenv.add-response-header = ( "X-Secret-Message" => "42" )
## for mod_trigger_b4_dl
# trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db"
# trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" )
# trigger-before-download.trigger-url = "^/trigger/"
# trigger-before-download.download-url = "^/download/"
# trigger-before-download.deny-url = "http://127.0.0.1/index.html"
# trigger-before-download.trigger-timeout = 10
#### variable usage:
## variable name without "." is auto prefixed by "var." and becomes "var.bar"
#bar = 1
#var.mystring = "foo"
## integer add
#bar += 1
## string concat, with integer cast as string, result: "www.foo1.com"
#server.name = "www." + mystring + var.bar + ".com"
## array merge
#index-file.names = (foo + ".php") + index-file.names
#index-file.names += (foo + ".php")
#### include
#include /etc/lighttpd/lighttpd-inc.conf
## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf"
#include "lighttpd-inc.conf"
#### include_shell
#include_shell "echo var.a=1"
## the above is same as:
#var.a=1
rutorrent
Code:
<?php
// configuration parameters
// for snoopy client
@define('HTTP_USER_AGENT', 'Mozilla/5.0 (Windows; U; Windows NT 5.1; pl; rv:1.9) Gecko/2008052906 Firefox/3.0', true);
@define('HTTP_TIME_OUT', 30, true); // in seconds
@define('HTTP_USE_GZIP', true, true);
@define('RPC_TIME_OUT', 5, true); // in seconds
@define('LOG_RPC_CALLS', false, true);
@define('LOG_RPC_FAULTS', true, true);
// for php
@define('PHP_USE_GZIP', false, true);
@define('PHP_GZIP_LEVEL', 2, true);
$do_diagnostic = true;
$log_file = '/tmp/errors.log'; // path to log file (comment or make empty to disable logging)
$saveUploadedTorrents = true;
$topDirectory = '/'; // Upper available directory. Absolute path with trail slash.
$forbidUserSettings = false;
$scgi_port = 5000;
$scgi_host = "127.0.0.1";
$XMLRPCMountPoint = "/RPC2"; // DO NOT DELETE THIS LINE!!! DO NOT COMMENT THIS LINE!!!
$pathToExternals = array(
"php" => '', // Something like /usr/bin/php. If empty, will be founded in PATH.
"curl" => '', // Something like /usr/bin/curl. If empty, will be founded in PATH.
"gzip" => '', // Something like /usr/bin/gzip. If empty, will be founded in PATH.
"id" => '', // Something like /usr/bin/id. If empty, will be founded in PATH.
);
// For web->rtorrent link through unix domain socket
// (scgi_local in rtorrent conf file), change variables
// above to something like this:
//
// $scgi_port = 0;
// $scgi_host = "unix:///tmp/rpc.socket";
?>
thanks for any help you can offer.
